8" GRINDING WHEEL
Diamond Wheel for Wet Grinders
(Various) |
£160.00 |
5" DIAMOND COATED
DISK 6mm thick with 10mm spigot
Diamond Coated Disk with
spigot on rear that can be fitted in a Jacob's Chuck
|
£49.95 |
5" DIAMOND COATED
DISK 11mm thick with 10mm spigot
Diamond Coated Disk with
spigot on rear that can be fitted in a Jacob's Chuck |
£59.95 |
DIAMOND COATED
CREDIT CARD HONE DOUBLE SIDED
Credit Card Size Double Sided
Diamond Hone
One side = Fine One Side = Very Fine
|
£18.00 |
DC01
Diamond Coated Honing Rod -
Stainless Steel
Size: L = 115mm D = 8mm |
£16.00 |
DC02
Diamond Coated Honing Rod -
Stainless Steel
Size: L = 115mm D = 5mm
|
£16.00 |
DC03
Diamond Coated Honing Rod -
Mild Steel
Size: L = 115mm D = 3mm
|
£p.o.a. |
CONE SHAPED DIAMOND
COATED HONING ROD
228mm long Stainless Steel rod 10mm
diameter reducing to 3mm. 8" is covered with diamonds allowing a handle to
be fitted if preferred. The tool was produced for deburring flutes in
gouges, raising burr’s on scrapers, sharpening ring tools etc.
|
£24.00 |
DIAMOND COATED BUTCHERS STEEL
WITHOUT HANDLE
10" steel |
£16.00 |
DIAMOND COATED BUTCHERS STEEL
WITHOUT HANDLE
12" steel |
£21.00 |
DIAMOND COATED BUTCHERS STEEL
WITHOUT HANDLE
14" steel |
£26.00 |
DIAMOND COATED
FILES
4" long 3/4" wide double sided with Medium grit on one side and Fine on
the other |
£14.00 |
PUMICE STICK
For use on Diamond Coated Grinding Wheel |
£3.50 |
PHIL IRONS ROTARY
SANDER
Bearing mounted, self powered and cooler
running sanding tool. Accepts 3” Skelton sanding pads (not included in
price)
|
£15.00 |
| SKELTON 75mm SANDING
PAD to fit above |
£15.00 |
ETR
Extended Tool Rest (for deep hollow
turning)
|
£30.00 |
HS01
Double Sided Hone Stone
Size: 5" x 1"
|
£p.o.a. |
HS02
Double Sided Hone Stone
Size: 7" x 2½"
|
£p.o.a. |
SF01 SMALL FILES
Various |
£14.95 |
ABRANET SANDING STRIPS
for dust free sanding
- Abranet discs outlast traditional abrasives for greater efficiency.
- Immediate dust removal allows for better sanding
- Extended product life requires less use of materials.
- Abranet mesh discs use a hook & loop attachment with vacuum backup
pads.
- Dust-free sanding improves working conditions with less
environmental impact.
|
Click Here for prices |
| ABRALON HAND PADS
- P1000 & P2000 |
Click Here for prices |
| MIRLON - Wire
Wool alternative that does not rust or leave bits of wire in the timber.
Ultra
fine price £1.95 per metre. (small piece available for trial FOC send stamp
addressed envelope) |
Click Here for prices |
ROYAL 77mm GRIP
DISKS for power or rotary sanders but can also be used by hand
|
 |
To go with these Grip
Disks,
we also sell the Hegner 3" Arbor at
only £7
unbelievable value |
 |
|
Click Here for prices |
All prices quoted exclude VAT, and Postage and Packing.
