|
Now also agent for:
MIRKA PRODUCTS
Click Here to read more
T & J Tools are here to provide you with an easy solution for.............
Diamond Coated Grinding Wheel
CLICK HERE to read review by Phil Irons
| 8" diameter, 2" wide diamond coated grinding
wheel for either model Tormek. Wheel stays flat and lasts much longer.
Sharpens HSS, Carbon Steel and Tungsten Carbide tools and tips |
 |
Diamond Coated Disk with spigot
CLICK HERE to read review by Terry
Porter
| 5" Diamond coated disk with 10mm spigot on rear which can be
fitted in Jacob's Chuck. Less aggressive than white wheels and can be used
on all types of tools including tungsten carbide. This is disk is 6mm
thick but it is also available 11mm thick with the edge coated as well as
the surface. |
 |
Credit Card Size Diamond Hone
|
Diamond
coated Credit card hone double sided Medium on one side and Fine on the
other
|
 |
Diamond Honing Rods
|
Stainless steel rods of
8mm and 5mm - both 115mm long are ideal for honing flutes. There is also a
3mm rod available in mild steel.
|
 |
Cone-Shaped Diamond Coated Honing Rod
|
228mm long Stainless
Steel rod 10mm diameter reducing to 3mm. 8" is covered with diamonds
allowing a handle to be fitted if preferred. The tool was produced for
deburring flutes in gouges, raising burr’s on scrapers, sharpening ring
tools etc.
|
|
Diamond Coated Butchers Steels
|
Supplied
without handles, these diamond coated Butchers’ Steels are available in
10" - 12" and 14" |
 |
4" Long Diamond Coated Files
|
Diamond File 4” long 3/4” wide double sided Medium grit on one side and
Fine on the other.
|
 |
Pumice Block for Cleaning Diamond Surfaces
Phil Irons Rotary Sander
|
Bearing mounted,
self powered and cooler running sanding tool. Accepts 3” Skelton
sanding pads (not included in price)
|
|
| Skelton 75mm Sanding Pad to fit the above |
No image available |
Deep Hollowing Extended Tool Rest
As Reviewed in WOODTURNING magazine. A great
confidence builder for people approaching this type of work........
Read Review by Terry Porter |
|
MIRKA PRODUCTS:
- Click Here for prices
Abranet Sanding Strips
|
Long lasting and
generating less heat than conventional abrasives, these 125mm x 75mm
mesh based sheets are available in the following grits:-
120
180
240
320
400
600
Click Here for prices
|
|
| Mirlon -
Alternative to wire
wool does not rust or leave bits of steel in wood .
Available in:
Very fine (Red)
Ultra fine price
(Grey)
£1.95 per metre. (small piece available for trial FOC send stamp
addressed envelope)
Click Here for prices
|
|
| Abralon Hand Pads (115 x
140mm) -
Click Here for prices
|
|
| Royal Plus Grip Disk
(77mm) -
P80
P120
P180
Royal Grip Disk (77mm) -
P240
P320
P400
P500
Royal Micro Grip Disk (77mm) -
P1500
|
|
To go with these Grip
Disks,
we also sell the Hegner 3" Arbor at
only £7
unbelievable value |
|
Click Here for prices
|
Click Here for prices
|
We also supply pumice sticks and various small files
A.G. Osborne
Phone: +44 (0) 1788 890121
e-mail: info@t-jtools.co.uk
| 
